BNBFM - ABEX 6054, FRICTION LINING
- MSDS: BNBFM
- Manufacturer: ABEX CORP FRICTION PRODUCTS GROUP
- Product Name: ABEX 6054, FRICTION LINING
- National Stock Number: 2530-00D002849
Product Identification
Product ID:ABEX 6054, FRICTION LINING
MSDS Date:12/01/1990
FSC:2530
NIIN:00D002849
MSDS Number: BNBFM
Responsible Party
WINCHESTER, VA 22601-3250
US
Emergency Phone: 703-662-3842
Info Phone: 703-662-3871
Preparer: M.K.LEUNG
Cage: 85117
Contractor
Telephone: 715-823-2141
Cage: 23382
Ingredients
OXIDES(IRON,ZINC,ALUMINUM,BRASS,ETC)
OSHA PEL 10 MG/CUM
ACGIH TLV: 10 MG/CUM
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
SILICA, CRYSTALLINE - TRIPOLI
CAS: 1317-95-9
RTECS: VV7336000
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
PHENOLIC & CASHEW COMPOUNDS
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
WOOD FLOUR & OTHER FILLERS
OSHA PEL 1 MG/CUM
ACGIH TLV: 1 MG/CUM
GLASS FIBER
OSHA PEL SEE SILICA DUST
ACGIH TLV: 10 MG/M3
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SOME PERSONS MAY BE SENSITIVE TO
CASHEW RESINS & DEVELOP DERMATITIS. DUST OF GLASS FIBER, SILICA,
TALC, GRAPHITE, ETC:CAN PRODUCE PNEUMOCONIOSIS & OTHER LUNG DAMAGE.
METAL DUSTS ARE IRRITANTS OF EYES & UPPER RESPIRATORY SYSTEM.
THERE IS LITTLE EVIDENCE OF CHRONIC INDUSTRIAL POISONING FROM
IRON,ALUMINUM & ZINC DUST.
Explanation of Carcinogenicity:DOES NOT CONTAIN ASBESTOS.
Effects of Overexposure:CASHEW RESIN:SKIN ERUPTION,SIMILAR TO POISON
IVY; PNEUMOCONIOSIS:COUGHING,WHEEZING,SHORTNESS OF BREATH,IMPAIRED
PULMONARY FUNCTION; INGESTION:GASTROINTESTINAL DISTURBANCES. GLASS
FIBER MAY CAUSE TRANS IENT MECHANICAL IRRITATION TO THE SKIN OF
SOME PEOPLE.
First Aid
First Aid:SHOULD NOT BE NECESSARY FROM REASONABLE HANDLING OF THIS
PRODUCT.
Fire Fighting
Extinguishing Media:WATER
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:GRINDING,DRILLING,MILLING,ETC.CAN RESULT IN
THE RELEASE OF AIRBORNE DUST. GOOD ENGINEERING CONTROL IS REQUIRED
WHEN THIS SHOULD OCCUR.
Handling
Handling and Storage Precautions:GENERAL WAREHOUSE STORAGE
Other Precautions:.
Exposure Controls
Respiratory Protection:NIOSH APPROVED FOR PNEUMOCONIOSIS-FIBROSIS
PRODUCING DUSTS IF PEL/TLV IS EXCEEDED.
Ventilation:LOCAL EXHAUST FOR DUST SOURCES.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES, GOGGLES FOR DUST.
Other Protective Equipment:LONG SLEEVES, ETC. AND BARRIER CREAMS FOR
PEOPLE SENSITIVE TO FIGERGLASS AND CASHEWS.
Work Hygienic Practices:INSTRUCT EMPLOYES IN THE USE OF DUST CONTROL
MEASURES. VACUUM INSETEAD OF DRY BROOMING AND WET CLEANING FOR
OTHER SURFAC
Supplemental Safety and Health
IF NO DUST IS GENERATED,THIS PRODUCT SHOULD BE RATHER NON-HAZARDOUS.
Chemical Properties
HCC:T6
Spec Gravity:SOLID
Evaporation Rate & Reference:0
Solubility in Water:0
Appearance and Odor:DARK GREY COLOR, FRICTION MATERIAL ODOR, DUST
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:INCOMPLETE COMBUSTION WILL CREATE
CARBON MONOXIDE & DIOXIDE.
Disposal
Waste Disposal Methods:HAZARDOUS INGREDIENTS PER 40CFR.PART 261,262 &
APPLICABLE STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.